...PCM FIX mode PCM ON: Select when receiving only PCM signals. PCM OFF: Select when receiving Dolby Digital and PCM signals. [Note] Audio that is input through the OPTICAL IN terminal cannot be output ...
...PCM signal playback mode) Decoding and playback are only performed when PCM signals are being input. e DTS (exclusive DTS signal playback mode) Decoding and playback are only performed when DTS ...
...pcm mode is turned on (pcm meaning pulse code modulation), in other words, the unit was switched to digital signal, so if the digital rca or optical TV input on your reciever is not connected to ...
...mode there is a light on that say PCM. When the sound goes out so does the PCM light on the display. If this is only on ONE SOURCE doing this, it's trying to tell you the quality of the digital ...
...leave tv on pcm. If that doesnt work check to make sure your not in a second audio mode (meaning set is on sap) sometimes a customer will accidentally hit the sap button. Put unit on stereo ...
...mode settings as well on some receivers. if it is set to DTS it won't work on PCM audio. if it is set to auto Digital it should work on any standard. check the PCM or DTS options in both the TV, and ...
Question about VIERA TC-P54Z1 54 in. Plasma TV
pcm to dolby digital on my tv model T27D390S You don't. You change the signal at the source device end, not the TV. If you have connected a Blu-ray player or a games console, then set the device audio
Question about VIERA TC-P54Z1 54 in. Plasma TV
...PCM mode. Soundbar in AUX mode. Can't get any sound from soundbar. What have I missed? PCM mode is a digital audio file that should be sent to the soundbar via an optical or coaxial digital audio ...
Question about VIERA TC-P54Z1 54 in. Plasma TV
...PCM. Change the Sound Bar settings as follow, using the included remote control. Set Sound Mode to Music by pressing the sound mode setting button (Music). Set VERTICAL S. to Off by pressing the ...
Question about VIERA TC-P54Z1 54 in. Plasma TV
...PCM in to limp mode, why do that? and limphome mode kills idle controls. and more. what is word wanst? so you have engine problems,. NONE TOLD and is EFI problems you guessed? (could be bad ,engine ...
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions