Questions & Answers for: pcm code p0410

Question about 2001 Aurora

2 Answers

...partially fills the AIR pump, it can then freeze. When the PCM commands the pump on, if the pump is frozen it cannot turn, thus overloading the circuit and "popping" the fuse. code 410 on olds ...

Ad

...code is set, the one-way check valves have worn out or failed and allow water (which occurs naturally in the exhaust) back into the pump. In any cold climate, especially in climates with higher ...

Ad

Question about 2001 SC

2 Answers

...pcm is setting the code because it is not seeing an increase in oxygen when it turns the pump on. Maybe it's not pumping properly. Chevrolet S10 P0410 Pump Problems Watch this video ! Doesn't matter ...

Question about 2001 Blazer

2 Answers

Code P0410 sets when the PCM has commanded the blower motor on and the solenoid open and there is little or no change in the oxygen sensor signal. GM has had some problems with these systems and there

Question about 2004 TrailBlazer

1 Answer

...PCM commands the pump on, if the pump is frozen it cannot turn, thus overloading the circuit and "popping" the fuse. Possibly symptoms include: MIL illumination obviously Hesitation on acceleration ...

Question about 2004 Envoy

1 Answer

...code. P0410 GMC Description An air pump is used on the vehicle to lower tail pipe emissions on start-up. The Powertrain Control Module (PCM) grounds the Air pump relay control circuit which energizes ...

Question about 2004 TrailBlazer

1 Answer

...code detected? The secondary air injection system does not detect the presence of air in the exhaust when introduced by the secondary air injection system. Possible symptoms - Engine Light ON (or ...

...code detected? The secondary air injection system does not detect the presence of air in the exhaust when introduced by the secondary air injection system. Possible symptoms: - Engine Light ON (or ...

...code P0410 & P0420 Circuit Description The secondary air injection (AIR) system reduces exhaust emissions after initial engine starts. This occurs when the engine start-up coolant temperature and the ...

...code DTC P0410 DTC P0413 DTC P0414 DTC P0418 The secondary air injection (AIR) system is used to accelerate the heating process of the catalytic converters by introducing outside air into the exhaust ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...