Questions & Answers for: patton fan parts motor

...years. You'll have to take the motor apart, clean the shaft and housing of dust and gunk, then oil or WD-40 it and reassemble. Be careful to note in advance exactly how all the parts go back

...I have Patton fan model U2-1487 120v 60Hz 1.5 amps. the 3-speed switch went out on it but "Patton does not carry replacment parts anymore. does anyone know where to get a 3-speed switch for this

...Patton fan sometimes doesn't start moving when switching it on to any speed. Once you gently spin the blades and then turn it on, it starts but then makes a grinding sort of sound until it gets up to ...

Patton 1887 fan blades wont turn I have a Patton 1887 fan. The motor is  humming but the blades won't turn and feel tight. I tried a few drops of oil but still won't work. I think I need to take ...

...fan (ie, no sound of a load). checked and 3 speed switch works. motor seems to turn freely, no burns or scoring on the armature or windings. there is a capacitor which i do not know how to check nor ...

need a fan motor for wall heater part no. a2540t i googled patton came up with americanhvacparts.com they have patton motors on ther site this might help you ?

Patton High Velocity Air Circulator Model G-1272, 110 current. After about 27 years, the motor quit. This fan is a wall mount behind my wood/coal stove facing the stove pipe. It has 3 speeds and moves

...Patton floor fan? I'm not all up on Patton Model#s, but this is an older unit, correct? You may try contacting Patton (Owned by Holmes now so you may have to go through them) If they cannot help you, ...

...parts (wires, capacitor etc) are attached so you remember how they go back together. Judging by some other questions here, this is a typical problem with this fan. If it's overheating, you may have ...

...from top Patton experts. ... The heating element is above the thermostat, and all you will see is a round disc with two wires attaching to. Ad. Patton PUH680-U Utility Heater Replacement fan motor