Questions & Answers for: Brother HL paper rubber

...paper. I tried cleaning rubber rollers behind the tray and metallic plate/paper slide by opening the front door with anti-static solution. It helps print one sheet then again the same problem-not ...

need to clean the rubber roller that feeds paper, unplug the printer, tip up on the back with paper tray out, use a damp rag to clean the 1 or 2 rollers that are just above where the paper sits inside

...PAPER PICK UP ROLLER. REPLACE THE THAT ROLLER WITH NEW ONE. OR TRY THIS. TAKE OUT THAT ROLLER OUT OF THE PRINTER AND REMOVE THE RUBBER OF THE ROLLER AND APPLY SOME TURNS OF PLASTIC TAPE OVER THE ...

...is on your "pick up roller" use to move the paper... take off your pick up roller and change the "rubber" on the pick up roller to the other side..just flip it to the other side (the

paper feed problems come from the rubber rollers. These can get polished and then can't grip the paper. I would open everything up. Take the paper tray out, check the paper, fan it, make sure it isn't

...paper tray, sometimes on certain documents the margins are too big and asks to go into the manual feed slot. Remove left cover (where the USB connection is located); Remove big black gear with a ...

paper not feeding from paper tray Pull out a paper cassette, lift up the printer and under you see paper feed roller (it is rubber), just clean roller with cloth and water or alcohol

...side all the way around all the rollers. Also clean the paper separation shoe (rubber pad) at the front of the paper tray. The last thing is to make sure your paper is dry. Damp paper sticks ...

...paper when replenishing to loosen the sheets. Also, printers with heavy usage will occasionally needs the rubber pickup rollers cleaned. Don't use alcohol since this can dry out the rubbers surface ...

...paper feed problems are caused by worn. The rubber treads in the rollers wears down, making them smooth, so they won't pick up the paper. Sometimes, they are aged, which also gives them a smoother ...