...panasonic_ty-la1500_lamp_1.htm&Click=1683. This buld includes the wires and connectors, and requires only a screwdriver. This company also offers a Philips bulb with the entire enclosure. Don't get a ...
...temp sensor inside the projector and now your projector need full service but if the air filter becomes clogged with dust, the internal temperature of the projector will rise, the TEMP indicator will ...
...panasonic PTLB60NTE shuts down after couple of minutes when I use wireless mode. How can I solve this? There is three indicators lights on the panel 1. lamp indicator. 2. temperature indicator. 3. ...
you replaced the lamp, did you buy a new PANASONIC lamp from a reputable source?) Try to fire up the projector. Note down any combination of LEDs if the projector doesn't work and post hem back here.
Question about Projector Lamp for PT-LB50 Series
...temp indicator lights if an abnormal temperature is detected. If it goes too high it will shut down flash. The lamp indicator is furthest away from the power switch if that helps. If the lamp timer ...
Question about Replacement Lamp For Pt-f200nt Pt-f200nte Pt-f300 Pt-f300e
temp light flashing the filter will roll itself when the projector is operate. the temp light flashing when the fans is fault,or there is much dust on the air filter check them
why is red temp light flashing? It is overheating. Check the fan.
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions