plasma Panasonic television model number: TH-42pz77u) but Saturday night, the television turn off and have five blinking red lights. Then we attempt to turn on the unit, the only thing that happens is
...blinks seven times and repeats. Physically disconnect the SU board and the SD board. (See precaution # 5) Plug in the TV and turn it on. Does the TV shut down and the power LED blink 7 times? Yes No ...
...blinks-7 times. will a new power supply fix it Physically disconnect the SU board and the SD board. (See precaution # 5) Plug in the TV and turn it on. Does the TV shut down and the power LED blink 7 ...
...Panasonic Plasma TVs have built in fault diagnosing circuit. If any fault occur with any circuit board inside, the loaded firmware will detect it, and will give you its idication in the form or ...
Question about TC-P42G15 Plasma TV
LED lights blinks 5 times and repeats but TV doesn't turn ON I used to connect my PC to this plasma TV through HDMI cable and was working fine, But suddenly one fine morning I was watching ESPN3 ...
...plasma model # TC-P42G10 Won't turn on. LED flashes red 5 times every 5 seconds. Would you know what needs to be fixed? Thanks, Anne. [email protected] These blinks [flashes] are fault ...
Question about TC-P42G15 Plasma TV
...Panasonic th-c50fd18 plasma TV. It shows a blank screen when turn on, blinks two times every 5 to 8 seconds. computer board, if so what is the model #? These blinks [flashes] are fault indication ...
Question about TC-P42G15 Plasma TV
...Panasonic Plasma TH-P42G15A mean? When you turn the power on the red LED blinks 5 times and then nothing happens. These blinks [flashes] are fault indication (Error Codes). From the number of blinks ...
Question about TC-P42G15 Plasma TV
...Panasonic TH-P42V20Z Plasma Tv. Will not power up. Red light blinking 4 times. Help!!!!! TV is 5 years old. These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur ...
Question about TC-P42G15 Plasma TV
...Panasonic Plasma tc-p50g15 TV with 5 Blinking Light code and will not power on. These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions