Questions & Answers for: panasonic door actuator

Error code 061 and the ADF door is closed I am getting Error code 061, telling me to close the adf door. The door is closed, I have turned it off, unplugged it and am still getting the error code. In ...

...projections on the door) and the door should open. You can find Panasonic parts in Australia here. We're happy to help you with free advice and we'd appreciate your thoughtful rating of our

message; remove misfeed paper, when its not misfeed paper at all One of the feed switch actuators is trapped down. Remove the toner cart and check underneath. Open the rear door and check there too.

the door closes but not firmly their is still movement when fully closed The door may be easily adjusted by slackening off the screws that clamp the door catch/actuators in place whilst holding the ...

...Panasonic Genius Prestige 1200 W microwave. The door won't open. Tried unplugging and plugging in; that worked once, but now doesn't help. Sounds like the door catch is stuck. Perhaps this will ...

door catch broken - door will not close. no sign of a broken piece. There was a bang and the catch just doesn't hold at all. door swings open Door catches. One of the latches has broken off and is not

Close Front Panel U1 Error Check actuator on door to make sure it's not bent or missing. Actuator tab should engage with photo sensor to tell machine door is closed.

panasonic microwave door won't lock This microwave is brand new and I only used it once. After that the two plastic latches on the door are no longer spring loaded, but just free to move about. I ...

...Panasonic DMR E S45V just stopped working. The Error message is F04. The DVD door won;t open, the VHS door won;t close. Unplugging the unit, pressing all the buttons! Check the servo unit to see if ...

door is opened on Panasonic 1300w microwave, not a refrigerator Check the 3 micro switches actuated by the door lock assembly. You will find that one of these switches is not working properly. You may