paint be coming off. The metal is now showing is theunsafe to use? If the mocrowave still working, I wouldn't worry about operating it. If you want to have some peace of mind you can buy the paint and
...coming off is there a product i can use on the inside to make it white again? Yes, microwave cavity paint. There a few spots where the paint is worn down under the carosel will this stop it from ...
paint coming off inside microwave oven We did not notice the paint inside our whirlpool microwave oven on the top wall has been peeling off and possibly getting into food. Concerned about harmful ...
Question about Advantium SCA1001SS Convection / Microwave Oven
coming off--is this harmful? its not harmful at all,,,it just dont look to nice,, the microwave will still work fine as any microwaves will just bounce off the inside of the door and be reflected back
Inside my Daewoo KOR-6Q27 microwave oven, underneath rotating glass plate, white layer (or paint) have piled off and rust have started to emerge. Can this problem be fixed or i have to buy a new one? ...
paint is coming off the inside of my ge microwave. is it safe to use? No it is not safe! the white paint is a special type designed for microwave ovens that prevents arcing from the magnetron, because
Question about Spacemaker JVM1640SJ Microwave Oven
Coating inside the built in GE Microwave is coming off I have tried a hard enamle paint Did not work Any other suggestions need to sand it real good and use appliance paint
Question about JVM2070 Microwave Oven
paint coming off inside microwave and buttons at control panel pushed inside of panel so unable to use The keypad control board may have to be changed, also the cavity paint must be replaced with the ...
Question about JVM2070 Microwave Oven
with any oil paint or what can i do for this. microwave is working properly,but the paint is coming out . pls an P/No.-DE6800307A paint usually has some mrtal in it.better to ask g.e. customer service
Question about JVM2070 Microwave Oven
...paint that may have chipped or come off because of the arcing.If your waveguide cover and/or stirrer are all OK, then the spark is coming from your magnetron. The antenna on your magnetrom has ...
Usually answered in minutes!
3,405 Questions
567 Questions
285 Questions
308 Questions
275 Questions