...the pad becomes brittle and breaks. No pad to hit, brake lights stay on. Check the switch above the petal. It should be pushed all the way in contacting the petal's arm when the brake is not
...PAD switch appears to be faulty and maybe the PAD off light the blink codes are 2 5 i have tried to jiggle the key in the PAD lock and have gone off and on several times without any luck is the PAD ...
Question about Dance Dance Revolution Hottest Party for Nintendo Wii
...pad layer to help the switch stay apart. But not so much to keep you from closing the switch when you hit the spot. [b]From the net: "A soft pad works by having 2 sheets of contacts seperated by a ...
Question about Lynx Wireless Controller for PlayStation 2
...additional multi-speed Turbo functionality * 3-way switch enables D-Pad to also function as left or right analog stick i think its the multi speed turbo switch mybe wrong hope this helps you out ...
...switch pad (a grommet like pad that the brake light switch button rests against.) If the pad is missing, then with the pedal all the way up the brake light switch button will just go through the hole ...
...pad have a polarity switch on? - try switching it. Has he correct pad type been assigned in the module? Has an instrument been assigned to the pad (Roland: Press INSTRUMENT, hit the Pad, select a ...
Question about ProBook 4520s Notebook
...Switch above pad shows orange. White when activated. Hi Harry, I figure you will have had this answered by now but anyway, double tap on an area in the upper left hand corner of the touchpad. This is ...
Question about ProBook 4520s Notebook
...pad switch does not switch off the oven light, any ideas other than a malfunctioning switch? 1.turned off main breaker for a possible reset 2. pushed on/off pad switch several times with no results, ...
...pickup power window motor removal You will need to remove the door handle inside and the door kick pad along with the arm rest and any switches on the door. To remove the kick pad remove the screws ...
...pad. This button or switch is usually used to enable or disable the key lock pad. Press and hold the button or switch for a few seconds until the key lock pad light turns off. This indicates that the ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions