Questions & Answers for: p600c 2

Motor runs both forward and reverse, but cutters don't turn I can hear the motor run but the cutters don't turn. My main problem is that I can't seem to figure out how to separate the cutter tray from

...P600C-2 Motor runs in reverse, but not forward The motor/gears seem to be working fine, there are no jams in this shredder. I cannot get it to accept a piece of paper to be shredded. Help! On mine a ...

Shredder no longer runs I was shredding about 2-3 pages and once the pages went through, the shredder just stopped. It won't go in reverse either. It's been a couple days and it still doesn't work. ...

Shredder no longer cuts out after 1 sheet disposal no longer shreds after one sheet ? or no longer turns off after it finishes one sheet? unplug unit open it up clean it out with compressed air and ...

...P600C-2 wastebasket - and the unit only runs in reverse. We need to put our two pieces together! I threw the Piece of Junk MIC-part away a few days ago due to the broken and non-available nylon gear. ...

...p600c-2 shredder will only run in reverse. I've blown compressed air on the switch and pushed on it with a toothpick but neither method worked. I removed 6 screws and the cover of the on/off switch ...

...p600c-2 shredderappears to have the same problem I had, it would run in reverse but would not shred new paper. I removed the 6 screws that are visible on the top assembly, but could not get the top ...

...p600c-2 shredder and it will go in reverse, but it wont work in forwards. we have taken it apart, and we think the problem is the little switch inside. please help? I had the same problem with my ...

Why doesn't my Fellowes P600C-2 work? It just doesn't work at all. No sounds, nada, zero no power to the outlet perhaps . push the reset button on the plug,perhaps