car rides rough error codes: P1390 P0601 car dash board rattles when idle and drives rough. Could it also be my spark plugs, and or the ignition wires. According to what i find the PCM Read only ...
cam timing i change water pump n timing belt. now the check engine lite is on for code p1390 cam shaft is out of timing... does the position sensor need to be replaced or do i have to re-time the car?
neon is showing a dtc code 1390, timing belt has skipped one or more teeth. Checked the timing marks and everything is as it should be, should I condemn the cam sensor, or the crankshaft sensor? Or is
...neon cuts off on me after i drive it for a while. the check engine, fuse light are on in the car but when i check the fuses they were all ok. the car is a stick shift, it drives ok for a well then ...
...neon located ? What to do if I got a code p1390 from an obd 2. And how do I fix it? on most chrysler vehicles it is mounted to the transmission bell housing on top it reads off of the flywheel ring. ...
...neon and the code read p1390 what does it mean? and how can i fix it? the car is a stick shift so where would the crank sensor be located at in the car. "Timing Belt Skipped One Tooth or More" To fix ...
1998 plymouth neon has p1390 code reading. What does this mean Cam and crank signals don't match. Does it still run ok? Timing belt is suspect.
Question about 2000 Neon
i have a 2001 dodge neon that received the code p1390 what does this mean P1390 - Cam and crank signals don't match - the timing belt may have skipped a tooth
...Neon reads DTC P1390. What's that mean? See this thread: http://www.fixya.com/cars/t21943979-2001_dodge_neon_received_code_p1390_mean have 2001 dodge neon that received the code p1390 what does this ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions