Question about 91112 / 91114 / 91117 Electric Kitchen Range
Oven gives me an -F3- message and stops working I have a Kenmore electric range model no. 9119328813. When I set it to bake it starts to heat up properly (the element starts to get hot) but before it ...
...working and F3 comes up on the readout - along with a series of beeps - pressing any of the buttons on the touchpad does nothing - The F3 stays there and beeps intermittently. microwave quits working ...
Question about JRP15 Electric Single Oven
...working sensor. F3 is Open oven temperature sensor circuit. F4 Shorted oven temperature sensor circuit . F7 Component failure. To fix this you need to read oven temperature sensor circuit at oven ...
F3 error code is an oven temperature sensor fault. The sensor is a small probe that sticks out of the back of the oven wall. They do go bad and can be easily replaced. If I had your EXACT model number
Question about 30172 / 30174 / 30179 Gas Single Oven
F3, and the oven trying to star to work but F3 appear and the oven turn off automatically.. While using the self clean feature you burned out the oven temp sensor. Replace the oven temp sensor. Do not
Question about 30172 / 30174 / 30179 Gas Single Oven
...working. I've tried turning off the power to the oven by the power box which is what I was told to try but that has not worked. What does F3 mean???? f3 is a bad sensor part number WP8053344 this ...
Question about 30172 / 30174 / 30179 Gas Single Oven
...and the oven does not work WHat part work be defective to give me this fault code EO-F3? F3 - E0 Oven temperature sensor (RTD) opened (upper oven, if double oven) Replace Oven temperature sensor
Question about 30172 / 30174 / 30179 Gas Single Oven
...across my oven and it no longer The Power went out and when it came back on my oven read an error msg of "F3" and it no longer works now, why is that? F3 Oven too hot Replace oven temperature ...
Question about TGF364AS Gas Kitchen Range
...F3 CODE, OVEN DOES NOT WORK my tappan model # TGF367CFSA Gas Stove is giving me a F3 Code. I don't what could be the problem, the top burners work but the oven doesn't. I changed the igniter but that ...
...working F4 Oven temperature sensor (RTD) shorted Replace Oven temperature sensor (RTD) The F2, F3 and F4 codes refer to problems with the oven temperature sensor or the keypad. If you see the ...
Usually answered in minutes!
1,163 Questions
465 Questions
395 Questions
390 Questions
353 Questions