Questions & Answers for: outlet working kenmore stove

outlet to see if this would help to no avail. The bake button works and I can set the temperature but the clock just won't stay on. I will appreciate any suggestions. Thank you for any assistance. the

...Kenmore gas range, model number 362.7556191. I was cleaning the top of the stove this morning and when I turned on the knobs for the burners, they wouldn't ignite. All I get is a clicking noise. The ...

...Kenmore Elite Microwave model #80822. I was cooking on my stove this evening with the vent on the microwave on. When I tried to use the microwave, it would not work. None of the buttons worked. I ...

...Working fine yesterday. Hi . I would begin by pulling the stove out and making sure it is plugged in. If it is, unplug it and plug something else into the plug like a blow dryer to make sure you have ...

kenmore stovetop the other electrical outlets trip, i unplug it and reset the outlets and the outlet works but i can't use the stovetop unless i light the gas with a match now. what is my problem? you

...working.............what could have happened and is it worth it to get that fixed? I have had the Kenmore model 95423 range for 5 years. thank you for your time. Electric gas igniters sometimes get ...

...stove. No problem with the outlet either. Hi, Here is a tip that I wrote to give details about why your cooktop will notspark to light the burners.. Cooktop Range Stove spark ignition does not work ...

kenmore 18500 reset will not reset. I change outlet, breaker is good the reset cord is bad replace it if 220 can replace with stove cord ,tie in to old cord use big wire nuts,and electrical tape I did

...electrical outlet short out. There's power at the outlet, and now my Kenmore will not produce heat on the burners or the oven, but the clock works. Why? Is the a fuse inside this appliance

...kenmore)to the power cord of my new stove. I need to know where the red, black, green and white wires go. First try using same order as in old cord did not work. Can you please provide wiring diagram ...