oreck XL upright and the belts keep coming off. I have cleaned it througly inside & made sure the brushroller was cleaned well. I did notice on the side of the brushroller where the belt goes on to is
...oreck xl how do i replace the belt on my oreck xl vacuul cleaner? Either have to take the bottom plate off, or there is a small door with one screw to remove to replace the belt. Then it goes around ...
Oreck XL Classic The belt is on properly, however the brush will spin, then stop. http://geeksquad.fixya.com/ThreadView.aspx?prdid=19810&thid=703827 Oreck XL Classic posted by balis on Jun 24, 2008 ...
...oreck xl keep breaking the belts keeps breaking like it is getting to hot and only breaks half way, enough to keep it from turning. Thanks, Kathy the brush roller is siezing up on you.try to take the ...
Question about XL2000 Bagged Upright Vacuum
...oreck xl extended life model xl9000w. The site would not let me post unless I picked a model from its list. Thanks I am having the same trouble. I bought the vacuum new in October 2007 when my wife ...
Question about XL Ultra Bagged Upright Vacuum
...Oreck for 4 years but hardly used it? The smell is probably from the belt. When they are worn and stretched they can start to smell. You can get replacement belts for your model here: Oreck XL7 ...
belt is slipping off the shaft.Solution - check see if roller turns easily by hand if not change the bearings.3. THe motor has twisted in its body due to cracked housing or worn rubber seats.Solution-
oreck xl won't start oreck xl won't start This could be for various reasons. Check the power cord and try a different outlet first. See if the power cord is loose or damaged. Next check ...
Question about XL Ultra Bagged Upright Vacuum
...Oreck XL 21 stopped self perpelling, what so I need to replace or fix? There is a small drive belt that turns the wheal that may need replacing open the drive belt compartment and replace like the ...
Oreck XL vacuum is not turning The brush turns freely by hand; the motor is turning but when I replaced the belt, the brush does not rotate. Frank, I work at an Oreck store and my manager & I were
Usually answered in minutes!
1,132 Questions
1,137 Questions
870 Questions
836 Questions
