Questions & Answers for: optoma power light flashing

Question about EP719 XGA DLP PROJECTOR 2000L 2500:1 CONT DVI-D WITH HDCP Multimedia Projector

0 Answer

power up optoma ep732H When my optoma ep732H projector is in standby mode, green light flashing, I push this button to power on and the green light goes to steady, but after about 20 seconds an orange

Ad

Question about MovieTime DV10 Multimedia Projector

1 Answer

POWER FLASH LIGHT IS NOT FUNCTIONING NO SIGNAL I AM HAVING THE OPTOMA DV 10 MODEL PROJECTOR BUT IT IS NOT AT ALL OPENING NO SIGNAL IS COMING WHEN I SWITCH ON THE POWER JUST THE BLUE LIGHT FLASHES AND ...

Ad

Question about EzPro 739 Multimedia Projector

2 Answers

power to optoma ezpro 739 I open my projector up to clean it and when i put it a back and plugged it in the was no power going to the projector (no lights on or flashing) and how do u take the top and

Question about EP750 Multimedia Projector

2 Answers

...power standby button Optoma EP755, new lamp, when power standby button pushed, led changes from flashing red to solid red, lamp cooling fan does not start, no light from bulb. you need to reset the ...

Question about EP750 Multimedia Projector

2 Answers

...Optoma 755 projector will power on but the standby light continuously flashes green, no fan or lamp light. Please help. Did you find a solution to this problem? I have the same thing with my Optima ...

Question about EP1690 DLP Projector

1 Answer

...Optoma 1690 which has strobing - standby/on, temp and lamp lights. This happens as soon as it is plugged into power. Then after doing this for about 5 min, on the stanby light flashes once a second. ...

Question about RD65 65" Rear Projection HDTV

1 Answer

...OPTOMA WHEN YOU POWER IT ON GREEN LIGHT FLASHES THEN AFTER 20 SEC OR SO 2 SOLD RED LIGHTS THE FIRST 2 FROM LEFT. WOULD YOU BE INTERESTED IN SELLING YOUR RD65 TO ME FOR PARTS ?  PLEASE CALL ...

Optoma HD66 replaced lamp, LAMP WARNING light keeps flashing, still won't turn on? I turn my projector on and the power light goes solid green. Then after a few green light blinks the LAMP WARNING

Question about GT750-XL - DLP projector - 3D OPTOMA

1 Answer

...fault switch on projector and after a minute it switches off and power light flashes amber and lamp light is on red , do i need a new lamp? Look at the ballast module. It controls the lamp

Question about HD80 Projector

1 Answer

Power switch only unplug mains lead, when reconnected after 15 minutes exactly the same problem, lamp is about 200 hours old and was Optoma genuine lamp. Can anyone help please Sound like the original

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66850 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...