Questions & Answers for: opening vornado fans

vornado 210B floor how can i clean the blades? i can't seem to be able to open the fan up You can turn the unit around backwards and find three integrated clips holding the front cover on.I use a ...

vornado heater doesn't work on high setting but only at low setting Any way i can fix this heater myself . it's out of warranty (2 years old) Dust on the inside of the unit can cause the overload ...

Opening Vornado fan (model EH1) for cleaning How do I open Vornado fan (model EH1) so that I could clean fan blades? How do I open vornado fan (model eh1)so I could clean fan blades?

how to open and clean face the fan away from you look real close around the outside ring you will see them there small philipps screws hard to find one trick is to make a small scrach on both sides ...

How do I open to clean 600 series vornado floor fan There are three clips the hold the grill to the cowl. Look along the back, outer edge of the fan. One clip at 11 o'clock, one at 2 o'clock and one ...

I have an old Vornado floor fan (sits on pole which curls around to form base) and cannot figure out how to open it to clean. I've read through all the other questions, which indicate clips or ...

...soft brush should work fine. Also if you have it compressed air will help. this can be doen without opening up the cage. but opening up the cage might make it ...

How do I Open the Vorando Tower Fan to clean I can not open the Vorando Tower Fan Use a flashlight to look through the vents on the front. You should see screws.

how do i change battery on vornado remote how do I get the battery cover off it may be held on with a tiny screw.. it needs removed before you can open it up

How do you remove the grill on a type 633 Vornado fan. Our Model 633 has both screws and clips. I first undid the screws at 3, 6 and 9 o'clock positions on the back of the grill, then used a flat ...