Questions & Answers for: Chrysler PT Cruiser open ground

Question about 2005 PT Cruiser

1 Answer

...open, shorted to ground or battery voltage or 5v supply CMP Sensor ground circuit is open PCM has failed Trouble Code: P0340 No Camshaft Position Sensor Circuit Failure Trouble Code Conditions:Engine ...

Ad

Question about 2001 PT Cruiser

1 Answer

...ground cables hiden ) so the electric circle of fuel pump was open and thats why it doesn't work . thanks for your help and this car now is runing in tripoli-libya streets . There is no fuel pump ...

Ad

Question about 2005 PT Cruiser

1 Answer

...First thing to check are the plugs. If plugs are dirty, this would be the most common source of your problem. If the plugs are good, then it could be either a bad fuel injector or bad

...open the drivers door even when the lights are off, The alarm does turn off when I close the door. It sounds like the Lights On alarm is sticking, What causes this??? Most likely a bad ground switch ...

open the cover expose the inside  have some one turn the key on  does the ASD make contact?  If not turn the key on collpase the ASD so it make contact do you hear the fuel pump come on

Question about 2003 PT Cruiser

1 Answer

...ground signal this is from the PCM,which recieves its input from the cranksensor, which is located,under the starter,Check for open fuses especially ignition fuse, and make sure the harness to the ...

Question about 2001 PT Cruiser

1 Answer

...open circuit for the number two fuel injector.You should have power on one side of the injector an a ground signal from the PCM on the other.Code 301 is for a miss on cylinder one which could be ...

...open door from inside. Suddenly door opens from inside and window won't come down what's the problem Tests/Procedures: 1. Check the power and ground at the master switch mount in the dash. Pin 12 is ...

open or shorted to ground • Stepper motor coil circuit(s) is shorted to voltage • Stepper motor has failed • PCM has failed Engine running; system voltage over 11.5v, and the PCM detected an incorrect

...OPEN TCR GROUND CIRCUIT OPEN TRANSMISSION CONTROL RELAY CIRCUIT OPEN TCM PIN 16 TO TCR OPEN OR BAD CONNECTION TCM PIN 17 TO TCR OPEN OR BAD CONNECTION TRANSMISSION CONTROL RELAY DEFECTIVE NO OUTPUT ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...