Questions & Answers for: open cd tray emachine

CD ROM.now it wont open becoz of that.I want to know why did my cd break and how can i fix my CD ROM now?? This has happened to me. Sometimes when I'm in a hurry I'll place a CD or DVD in the tray and

...put your cd in). Put the paper clip into the hole and push firmly. CD/DVD tray will open. Also you can try going to my computer then right click on your cd/dvd rom icon. Then left click on eject. ...

When you feel resistance, push another 1/4 of an inch, and the tray will "unlock", and you can gently pull the tray to a fully-open position, and remove the CD. Then, it's time to replace the CD-drive

cd rom doesnt open properly IS IT ON?...DOES CDROM HAVE POWER GETTING TO IT FROM PC? Next to open/close switch there is a small pin-hole. Push a paperclip into this hole and gently pull out tray...try

...cd on tray, the cd wont stay on tray to load, dont know what else to do Sounds like the tray is not comming out completly. Before you eject the tray you should notice a very small hole. take a paper ...

...of the cd tray push a small pin into it and the tray will open to allow you access to the disc the take the player appart and replace the drive belt just at the front best of luck merry ...

...Open the CD rom cover flap if there is one covering it. There will be a small hole in the cd drive under the CD tray. Stick the paper clip in and push. This will release the tray. Pull the tray out ...

...CD/DVD drive) has a small hole under the tray. If not then unplug the computer from power, observe Anti-Static Precautions, and open the computer case. Remove the Front Panel. (Plastic front of ...

...rom? if so, try using a needle. there is a hole below the tray. use that needle to push the needle in the hole... just push the open button then push the needle in the hole to open the cd tray. ...

is the hole located to open dvd cd door where is the hole located to open dvd cd on emachine The small hole to put a pin or paperclip into is on the face of the DVD tray. It is there, look hard for it