Questions & Answers for: oki printer sensor error

Oki Printer c3200 error code Hi I've had an error code 543 - k toner sensor error... what do I do to fix this...? is there a way to reset? I've taken the K toner cartridge out , cleaned, wiped off the

...sensor error on an Oki C3520 Laser Please can someone help me with my Oki. I have just replaced the balck & yellow toners (They were empty) and now the screen says 'check toner cartridge yellow / ...

Oki C5400n LED printer, its now displaying the error message: 162: Fatal Error. Does anyone have any idea what part of the printer is causing this error. The transfer beld is brand new and we've tried

Oki C3200 has the following error message 541:m Toner Sensor Error There are several reasons for this message... we will start with the easiest to solve. Here is a link: http://www.katun.com/downloads

on917:Fatal Error This is the message I'm getting on my Oki 9650 printer. I've turned everything off, unpluged, then started again. Aany ideas as to what might be causing this or better, how to fix it

...sensor error displayed on oki c7300 take out the magenta cartridge. and make sure the edges are clean. There are little metal pieces on the sides where the sensor reads the cartridge. Also, make sure ...

Oki c5800 printer with a sensor malfunction, where do I find this sensor? How do I eliminate this problem? Toner sensor error The toner sensor (43131601) is located on the right side of the ...

...non-original Oki toner. The problem is the chip sensor cannot read the chip on the toner. So either the sensor is not working or the toner is defective. Regards Abhilash How do u rate the

How to fix the Oki Toner Waste Bin Full Error Some OKI's have the sensors in the side frames, using a q-tip clean off they are round units, about the size of a nickel.

OKI Printer shows the OKI c5300 toner sensor error on the display screen, follow out the blog carefully. It contains all the needed information to help you rectify the error. You can also connect with