Question about KX-TG2740 Cordless Phone
...button on handset, scroll to initial setting, select by pressing right arrow, scroll to registration, select, select hs registration, follow directions on handset display, pressing mute on "new" base ...
...pin - must be done within 3 minutes of entering the pin - and voila! Panasonic manual says hit the Intercom button and when the "OK" thing comes on the LCD screen, push the button underneath the
Question about KX TGA270S Cordless Expansion Handset
...initial setting, registration, deregistration, enter 335(deL) and then press Ok (right button on screen). Once that is done press mute on the base unit and Ok on the hanset (right button on
...OK. Then move to the base and press and hold the Locator button until the registration tone starts. If all the handset ring, press the locator button to stop the response and start over. Within a ...
Question about KX-TG2770 Phone System w/ Digital Answering Machine
...OK button. Then wait until the handset display changes as follows. If you receive an error message indicating the maximum number of handsets have been registered, you will need to deregister the ...
...OK" button on the handset, but there is no OK button and no OK is showing up in the screen either. It says that it's too far from the base. Did you figure this out? I can't connect my phone to ...
button, then use the up or down arrow buttons to navigate to the HANDSET SETTING menu and press OK. Again using the up or down arrow buttons navigate to the RINGER SETTINGS submenu and press OK. Using
Question about KX-TG2740 Cordless Phone
OK or Select button when you navigate through the menu system. Since the soft keys access other options when the phone is in use, they only access the menu when all of the handsets are in standby mode
Question about KX-TG2740 Cordless Phone
...OK to save. Press Exit to leave the menu system. Alternatively, you can adjust the ringer volume by pressing the Volume Up/Down buttons while the phone is ringing. The manual for the KX-TG4011 is ...
Question about KX-TG2740 Cordless Phone
OK. On the base, press and hold the Locator button for 5 seconds and the registration tone sounds. Press OK on the handset you are trying to register. If all the registered handsets start ringing, you
Usually answered in minutes!
3,453 Questions
1,326 Questions
1,157 Questions
1,197 Questions
607 Questions