Questions & Answers for: oil sending unit alero

...Oil Sending Unit is Bad 2. OIL PUMP BAD and has LOW PRESSURE 3. GAGE MALFUNCTION well it seems that either ur oils is more than the required level or the sensor is not working well (pressure

Ad

Question about 2001 Grand Am SE

1 Answer

oil leak just changed head needs some help car is leakin oil and i think it is the oil sending unit where is it it is a 3.4L v6 olds alero its by the oil filter

Ad

...There is no valve train noise, and engine runs just fine. Have the oil changed to remove any moisture condensation in the oil. Air in the oil deceives the sending unit and sludges up the oil

oil pumping out from back top of motor when started 2.4L olds alero 2000 Sounds like your oil pressure sending unit may be leaking can you access and see exactly where the oil is coming from?

...light binking on and off then going out on 2003 olds alero 3.4 oil is full probably the sending unit but it is safer to have the oil pressure checked at the rpm and temperature that this ...

Question about 2001 Alero

1 Answer

oil is not low then the pressure sending unit may be bad. do not drive the car till you are sure it is getting oil. If the oil pump went bad you may not know it till the engine siezes up, then its too

Question about 1999 Alero

1 Answer

...unit located on a 1999 oldsmobile alero 2.2L ENGINE OIL SENDING UNIT LOCATED FRONT CAMSHAFT HOUSING ON LEFT DRIVER SIDE OF ENGINE.FOR 3.1L ENGINE OIL PRESSURE SENDING UNIT LOCATED NEXT TO OIL

...OIL SENDING UNIT THREADS TO KEEP OIL FROM LEAKING OUT.NOW IF YOU HAVE V 6 ENGINE OIL WILL LEAK FROM OIL FILTER OR SEAL DAMAGED OR FILTER TOO LOOSE TIGHTEN LITTLE MORE WITH HANDS AND A RAG.CHECK OIL ...

...oil sending unit in 2000 alero with a 2.4 The oil sending unit on the 2.4l engine is mounted in a hole on top of one of the cam-shaft covers. You may need to remove the spark coil cover, this is the ...

...then both times it was running and in gear,while accelerating at stop light, other while turning. seems to run on warm side. Maybe they disconnected the oil sending unit wires,it's by the oil

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...