Questions & Answers for: oil pressure bronco

...oil pressure when ideling, has 20 lbs at highway speed. you have either a weak oil pump or a faulty sensor check the leads on the oil sending unit and make sure they are not frayed. if they are not ...

oil pressure gauge low how do i check pressure 92 ford bronco 5.0 howdo i check to see whats going on faulty gauge or pump the only way to tell for sure is to take the sending unit out of the block ...

oil pressure good at startup, after driving 10 or 15 min it gose down and out when stop. but will go up when givin gas. dose not knock or tap. its 86 ford bronco 302 try changing the oil pump sending ...

in my 1991 ford bronco where to I put and how much refrigerant oil to do i use U cannot put oil in separately--it is added when you put in the refrigerant, under pressure.

oil pressure keeps dropping? when i turn 1991 ford bronco on the pressure reads fine sometimes than it drops and the engine starts to tap. where is the pump located and how do you chANGE IT OUT? ...

...oil pressure ,runs smooth , but ticks like a machine gun ?1990 bronco ii 80,000 miles 2.9L xlt 4x4 sounds like a wornout push rod....if it ticks fast as you hit the gas ,then i beleive its the

...oil pressure It goes through passages in the block that go to holes in your main bearings which pressurizes the holes in the crankshaft which then oil the rod bearings. Another passage takes oil to ...

oil pressure sensor where would i locate the oil pressure sensor check near the oil filter. In a 1992 Ford Bronco the oil pressure sensor is located in the driver side of the engine above the oil ...

oil pressure drops to 0. When the engine rpm goes up, the oil pressure goes up. it appears that the pump pressure relief valve is stuck and is not sealing off the oil system to allow pressure to build

oil pressure gauge started "flicking" but not all the time, then I started hearing lifter noises. Oil pump going out? Plugged port? could be I would check the sump oil level first Just adding some ...