Questions & Answers for: oil drain plug torque spec

locate oil drain plug the oil pan is on the passenger side its right under the pan, be carfull its an alluminium pan and the plug strips out easily, it has a torque spec

...oil drain plug ? I don't have the service manual with me at the moment. But that oil plug should have an o-ring. It needs to be snug, but not too tight, you'll strip the threads in the oil pan. Also ...

CHANGING OIL ON 2006 GTO, WHAT TORQUE SHOULD THE OIL PLUG BE TORQUES TO Hello and welcome. here is the oil drain plug torque spec for your vehicle Oil Pan Drain Plug 25 N·m 18 lb ft

could you please give me the torque specs for oil drain nut and oil filter canister on a ford transit 2.4L duratorq engine. DRAIN PLUG IS 23 NM OR 17 LBF FT CANISTER HAND TIGHT THEN IF LEAKS A BIT ...

...drain oil from drain plug on oil pan when drained remove and replace oil filter also. remove the pan bolts pull off pan and gasket.put new oil pan gasket on if needed.when oil pan bolts are back in, ...

...Oil Drain Torque Specs Toyota Nation Forum Toyota Car and Truck Forums The blog above lists 27 - 30 ft. lbs. torque for the drain plug. As someone in the blog stated, 30 Ft. Lbs. sounds excessive , ...

oil drain plug gaskets before you torque it down (to specs) each plug has a torque spec; but i got away with re-using it a few times before i replace the gasket. I spin the drain plug on by hand first

...oil drain plug torque for an unidentified vehicle? If you post the year--make--model, I'll try to find that torque spec? When changing your own oil and filter, if there is a leak, the liability is ...

OIL PAN TORQUE SPECS 2011 CRUZE 1.4 ENGINE 18nm or 13ft pounds the pan has the torque stamped on the oil pan, near the oil drain plug.

oil pan drain plug with a new O-ring and torque the plug: a. On a plastic oil pan, torque plug to 45 N·m +/- 7 N·m (33 lb·ft +/- 5 lb·ft). b. On an aluminum oil pan torque plug to 60 N·m +/- 9 N·m (44