Questions & Answers for: oil change craftsman snowblower

...muffler After about 10-15 min. of using the snowblower it belches fire from the muffler. Try changing the spark plug. You may be having some misfiring going on here. Is your fuel to oil mixture

...change the oil last year,does it need to be changed this year to Hi Most common problem with snowblowers is clogged carb. Remove spark plug and put a tea spoon full of gas in the plug hole and try to ...

...craftsman. Replaced EVERYTHING (spark plug, fuel filter, oil filter, and degunked the carborator), and still was flooding. It ended up being the flywheel key. Cheap part, quick fix. I guess it can ...

...Craftsman 3 HP single stage. It wouldn't start. I changed the spark plug and now it started but it's running very rough with excess smoke. If I press the gas 'bulb', rather than making it run faster, ...

...change gear box oil?Can auger speed be increased? many Sears/Craftsman snowblowers have a shear bolt on the auger shaft or one on each side. This bolt is designed to break under a specific amount of ...

craftsman 26" snowblower will not stay running Starts, runs rough, dies. Cleaned out the gas tank, fuel hoses, removed the carb and sprayed it out, changed the oil just in case. Put it all back ...

...oil level, one with fill cap unscrewed, and one with fill cap screwed down tight. Which is correct? There is no difference. It just takes a little longer if you screw down the cap. If your level is ...

oil in it. I've changed the spark plug. I've used it for the past two years so I know all the levers and knobs are in the correct position. I've tried to start it by hand and electrically. If there is

Craftsman 208 cc ohv engine on cub cadet 524 swe snowblower.Starts, dies,then fine for a while, then starts hard,might die when auger is engaged,.could rebuild carb,but I don't think thats it symptoms