Questions & Answers for: oil 3 impala hold

Question about 2002 Impala

2 Answers

oil maintinence light , turn the key to the ON position , engine OFF , depress the gas pedal to the floor 3 times within 5 seconds and it will reset , now the tire monitor system , same deal should be

Ad

...oil turn ignition on with engine off press gas pedal to floor 3 times & light will flash then go out. or if you have menu button on radio press button until reset oil life appears ten press enter ...

Ad

oil change done about 3 weeks ago. Just recently the warning light turned on saying "please change oil engine soon? I checked the oil and it is still full with new oil. YOU HAVE TO RESET OIL LIGHT.ITS

Question about 2008 F 250 Super Duty 4WD

2 Answers

...3 press and hold trip/reset button 2sec. until mess. cntr. displays"oil life XX% reset if new" #4 press and release trip/reset button until mess.cntr.displays"hold reset if new oil" #5 press and hold ...

...3. Press the fuel information button until you see "Engine Oil Life" in the display. 4. Press and hold the "Set/Reset" button. 5. Observe as the engine oil life returns to 100. 6. Turn the key to the ...

...3. Keep scrolling until the menu reads "Oil Life" on the display. Push the "Prev" or "Next" button to go to sub-menu. You then want to press "Seek Ptype" or "Seek Pscan" up or down arrow until you ...

the way down 3 times and on the 4th time hold all of the way down until the "oil life" resets (100%). 3. turn the ignition off and verify it reset. That's it! Let me know if you need anything else

...oil change light is not a sensor its a maint light with doors closed and key on push the gas pedal to the floor and off 3 times and on the 3rd time hold it to the floor for 20 seconds that should ...

Question about 2007 Impala LS Sedan New Cars

1 Answer

oil filter adapter gasket on a 2007 impala Remove Front Right Side Wheel and Plastic well Covers Remove Drive Belt From A/C Compressor Undo The 3 bolts Holding the A/c Compressor To the Block Then You

...oil life turn key to on position. press gas pedal firmly 3 times fast. make sure you press firmly so pedal hits floor but dont hold it. just press 3 times fast. turn key off then on and the light ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...