Questions & Answers for: ohm read chip key 1996

pass key malfunction how do I over ride pass key malfunction on a 1993 oldsmobile 88? you don't replace ign lock cylinderand chip key

...chip in that ignition key? I am trying to figure out how much this is gonna cost me. Yes it is a coded key, the problem is without the resistance value of the original key (the little piece of ...

...to car. if key has a chip in it the lock cylinder is bad it has wires that sense that chip i've got a new one pluged it in at base of steering column with new key in it and used old key as ...

...the cost of a new key. This link explains and will help you.http://vatspasslockpasskeysecurityhelp.yolasite.com/ Needs a new ign.lock cylinder and chip key. The wires have worn to the lock

...ohm meter to measure the resistance of the chip on the ignition key then install that omh resistor to the wires. I went to start my 1994 oldsmobile delta 88 royale LS one day and nothing no clicking, ...

chip and car won"t start what can i do p.s lost old ignition hello! replacement lock cyldiners come with a blank key for reference only. you need to have your old key read by a dealer parts department

...my key and try again in 3 minutes. I've tried cleaning up my key and restarting but it's not working. Any ideas? Replace the ign lock cylinder and new chip key to fit it. The tiny wires have

...chip key or resistencia ?ohms????? is oldsmobile eighty eight 1992 serial 1g3hy53l8nh tank yuo you have to measure the resistance of the key chip then there is an orange wire coming down the steering ...

key has a little black chip in the shaft. It is actually an ohms resistor. It has a certain resistence. 1 of 15 different possibilities designated by GM Your ignition lock cylinder not only works with

...chip key. i need to find the vats module...but not sure where to look. looked under the drivers side and behind the glove box without luck. can someone help This is a very common problem on GM ...