Questions & Answers for: Mitsubishi Eclipse off balance

Mitsubishi Eclipse Harmonic Balancer 3.0L Removal The crank shaft pulley have come off of the harmonic balancer on my 2000 Mitsubishi Eclipse, V6, 3.0L, 24 valve engine. What is the best method for ...

...the harmonic balancer and acc belt tensioner then then remove the rest of the plastic covers take off the timing belt and tensioner pulley assembly then u can remove the water pump install is ...

the car wont start it cranks but wont start my car cut off om me at the red light and wont start back when i go to crank it it try to start but wont i took the coil pack off and the rubber pice is ...

...balance shaft belt as well as the crank shaft sensor my car will start butit does not have any power could it still be out of time and if so how do i do it You are probably a tooth off somewhere. You ...

how do i remove the harmonic balancer on a 98 I cant get the harmonic balancer any further off. I used a puller and have it almost all the way off. the balancer is now touching the frame rail. i ...

harmonic balancer How do i take off the harmonic balancer on a 95 eclipse. please explain what you mean by harmonic balancer ?? do you mean the air filter

...on this car is known to come apart.You likely need a new assembly,the pulley should never come off the balancer. The pulley is rubber mounted together, and they will spin free. If your pulley is ...

My harmonic balancer flew apart. I drove it on a tow dolly get home backed it off,and up on to ramps. Went to the salvage yard got 1 from a 94 put it on dosen't want to start. timing belt is good. i ...

...cruising the internet search engines for "how to load balance my LED's" or This might help: https://www.youtube.com/watch?v=LTlsswwm4Ew Or maybe you just bought some low quality LED light's off

...balance could be off. If it is more severe could be loose drive shaft or a transmission problem. Unfortunately this is one of those issues that would have to be seen to diagnose. Quite a lot of ...