...fraction/radical result into a decimal one by pressing the [S<=>D] key, or press [SHIFT][=] instead of [=]. However if you do not care about the MthIO and its nifty functionalities, you can ...
...number, press the [SHIFT][=] key sequence instead of just [=]. More permanent solution: If you do not want fractions nor radicals, configure the Input/Output to be LineIO. To do that, press ...
instead a backwards L pops up and various other problems with other keys. It is in mode M and D according to the top. On old calculators fraction elements are separated by what you call a "backward L"
...I get a fraction as an answer instead of a decimal? The TI-83 can only convert a small range of numbers to a fraction. To try so, use the >Frac function on the MATH menu. Press MATH 1 to invoke
without π) → improper fractions (with or without π) → decimal numbers ? Proper fractions (with or without π) → decimal numbers
...to a decimal point? To change a displayed result into a fraction, press the [S=D] key. To force a result to be displayed as a decimal number before it is displayed, press [SHIF][=] instead of
...31 and 1/4 can also be expressed as the following FRACTION: 125 / 4. If you are trying to convert that to a DECIMAL value instead, then 31 and 1/4 % = 31.25 % Good luck, I hope that helps.
...instead but one easy way I found to calculate the LCM us by adding 2 fractions in the following format: 1/a + 1/b, where a and b are the numbers you are calculating the LCM for. In my calculator the ...
...instead of silently doing a wrong calculation. Here is what the user manual says about the limitations of the calculator (and who or what does not have limitations?) These limitations concern the ...
...occurs before the power, and use the +/- key instead of the - key to enter a negative number. For example, to calculate 8 raised to the minus one-third, press 8 y^x ( 1 +/- 3 ) =. You should get
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions