Questions & Answers for: input signal sharp lcd tv

Question about LC-37D4U 37 in. LCD Television

1 Answer

...cycle back to the HDMI input source, the 1080i signal clears up fine. have the cable company set the box to 720p whic is the native resolution of the set.this will help with quick signal ...

Ad

Question about VSX-81TXV Receiver

1 Answer

...input of the Sharp the image cycles on and off at the LCD and the audio mode on the front of the Pioneer cycles between DD and Stereo simultaneously with the TV cycle. It seems to me that there is a ...

Ad

Question about Aquos LC-42D62U 42 in. LCD HDTV

1 Answer

...2 to input 4. Turned off TV remote. Returned to satallite remote, turned on TV, turned on satallite, still no picture. We seem to have power but no satallite signal. Ist time users of satallite

Question about Aquos LC-42D62U 42 in. LCD HDTV

1 Answer

...Input 4). This is my PS3. I get an audio signal when the TV is on regular cable. Any suggestions? When using HDMI as the source, the Dolby Digital data will NOT be passed through. If you switch your ...

...signal and there is only one Coaxial input on TV. If there's more than one for example ANALOG, or DIGITAL. Try each one. Each Televsion is different. This is this basic troubleshooting steps. I've ...

Question about Aquos LC-46D62U 46 in. LCD HDTV

1 Answer

...input I have a 46" Sharp Aquas LCD with HDMI inputs, however, I cannot get a signal from the Cox converter box although the HDMI cable is connected. I can get the signal through the componet cables ...

...signal in A/V input if good picture, cable line are no good You try to conect with CRT tube TV .If TV still same that Cable line need the special filter or call the cable company.if TV has good ...

Question about LC-32SB24U 32 in. LCD TV

1 Answer

play with tuning get picture on all channels -not just adjusted one .turn tv off then on -no picture again Check ur signal input?This a free air tv signal?Tries it with a digital atena,out door antena

Question about Aquos LC-42D62U 42 in. LCD HDTV

1 Answer

sharp aquos tv lost blue tones no blue tones green replaces blue Examine the set with the color OFF and if No blue (odd problem) check hookup----component uses red, green and blue cables and if blue ...

...signal from HDMI (Input 4); swapped cables, still nothing Attempting to connect to Xfinity box; works with coax connector but with reduced image quality Does it work on other video inputs like the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...