...nitro ''change oil'' light reset, how??? thats it Turn the key on, engine off, slowly depress the accelerator pedal to the floor three times within ten seconds. Turn the key off. Turn the key on and ...
...turn the key off, after that start the vehicle that should reset the light and alarm. please rate thanks You need to reset it. Look in your owners manuel for instructions to reset oil change
...Nitro (and if you have chance, do basing setting for throtle body with tester) Yes the stepper motor or automatic idel speed motor (ais) may have failed or the power supply to it may be disconnected ...
...engine, you should see that the light has reset itself, and will only come back on after 3000 miles, or if the ECU senses an oil problem. My light, wipers and indicators not working on my dodge ...
...oil light on dodge nitro This one is simple...Insert key in ignition and turn to on position (do not start engine)Press the accelerator Pedal fully to the floor and release 3 times back to back. ...
Nitro. Oil is good. I put coolant in. Dont know what else to check or how to clear it Some car parts places like AutoZone will plug in a diagnostic tool called an ODB2 and can tell you the error code.
Question about 2011 Nitro
...Nitro and the Check Engine light came on after I put oil in the car. The oil has been changed and it is still on. You may need to reset the error code and then read any messages. Take it to ur local ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions