Questions & Answers for: nissan strut replacement cost

...may pay $300.00 to $400.00 in part and labor.a louco garge would proubly charge $150.00 to $250.00 .but byeing parts for nissan can cost a lot. ask people around you for a good mec. ok have a good ...

...nissan altima and yesterday there was a very loud banging noise in the front by the tires. I went by a garage and he said my front coil spring broke. Do you have directions on how to fix this? how ...

replacement cost parts and labor for shocks and struts how much should it cost to replace may struts and shocks It would not cost you much. In my country Nigeria it's about $230 equivalent. Cheers and

...nissan 240sx front suspension. I've been told that rather then replace the strut I can replace the cartridge that goes inside . Depends if they havent already been changed and if that a manufacturer ...

...Nissan Maxima 2005 you have mcphereson struts not shocks, you will need new struts, labor plus alignment, Struts will run about $130 each, labor about $100 per side, alignment about $65.00 - about $ ...

...nissan maxima, I have just replaced the struts strut mounts and Sway bars. This was all an attempt to eliminate a squeaking grinding noise comming from the front end when going over bumps or taking a ...

...Nissan Maxima . Do the springs come with the struts normally? What would struts and springs cost? No, usually struts come without springs. Some aftermakets are available as complete assembly with ...

...strut contact worn rubble linkage or combination to all of the above. I would take the SUV to a good car wash that has under carriage cleaning. Let the SUV dry and inspect it someone who can compress ...

My car started making a knocking type sound when driving. Sounds like it's coming from the front passenger side. What could it be? The front struts were just replaced. Any ideas about this? outer ...

how hard is it to replace the lower ball joint on the left side? I have done front struts. I am an ag mechanic. you will most likely need a press, But if you are replaceing one side you might as well ...