Questions & Answers for: nissan pathfinder brake bleeding

...pathfinder no brake pedal after changing brake lines no brake pedal rear brakes lock up but front brakes dont lock at all solved solution was that the mitchell bleeding sequence was wrong the right ...

Ad

...nissan pathfinder has "ABS" and "BRAKE" lights on my dashboard..how do i get rid of these? Take it to a shop before you have a wreck because your brakes failed. is the master cylinder empty because ...

Ad

Question about 1995 Pathfinder

1 Answer

...Nissan Pathfinder SE-V6. As of last night, my ABS and emergency brake light have been on. the emergency brake is all the way off and i just put brake fluid in. what could be causing this problem? try ...

...Nissan Pathfinder - new pads; turned rotors. Now the pedal is spongy. What needs to be done or checked. If the brakes are spongy after a brake job the dealer should have blead them as part of the ...

pathfinder. do I need to bleed the brake lines completely for all 4 rotors? Is there some order I need to do this? Why wouldn't you bleed all 4? You need to do that every 2 years on all vehicles Aways

pathfinder 1993.brake pads changed. lines bleeaded, everything looks ok, but when brakes are applied doesnt brake, and brake pedal goes free travel. waths wrong? Try re-bleeding brakes - starting from

I have a 1995 Nissan Pathfinder that I have bleed the brakes three times and I still have no pedal. you either have a line leak, bad break piston, dirt in line or you are not bleeding lines right.

Question about 1996 Pathfinder

1 Answer

Nissan 4x4,my clutch is bled the same way as your,use the same brake fluid as you use for your brakes.Is your slave cylinder leaking or you just replaced,they have a one person bleeder kit for 8 bucks

nissan pathfinder and the brakes do not work at all. To the floor and no slowing down. Im not leaking fluid and I've attempted bleeding but it seems there is no movement of fluid anywhere If the brake

...Nissan Pathfinder 4x SE 3.3l v6 You bleed the clutch line, there’s no set amount. Open the bleeder valve on the clutch slave cylinder on the transmission and have someone pumping the clutch until ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...