Questions & Answers for: nissan engine dismantle

...engine bay. Also check the modulator. Its the black thing at the end of the fuel rail. The best advice I can offer is DONT BUY A NISSAN!!!!! New fuel pump started working, and found out the ...

...Nissan Pickup 2400/12 valve On a zero day this winter the truck started making a horrible noise and running rough. It also appears to have water in the oil. I took the valve cover off and found the ...

My check engine light came on and the dealer diagnosed it as the 02 censor. They said it would cost 800 bucks to do it. Is this realistic?It seems very expensive, I know there is 2 censors, is one ...

clutch petal goes to the floor with little resistance. can't get in gear. fill the reservoir for the clutch slave cylinder. No with the engine OFF pump the clutch 25 times. Yes 25 times. Now start the

...starter on an armada The starter on the Nissan 5.6 V8 is located between the cylinder banks on top of the engine under the intake plenum. To remove it you must dismantle the intake

Nissan Terrano 1998 overheating There is pressure in the system. It is pressuring the water tank and emptying the water out of the system. is there anything apart fom cracked head, block or blown ...

...nissan pickup 4CYL, 5 SPEED TIMING CHAIN REPLACEMENT AND NOW RAN FINE FOR ONE DAY AND THEN MADE FUNNY NOISE ,LOSS POWER AND DIED NOW WONT START BACK UP , JUST SPINS OVER Hi Sarah, It would seem to me ...

...Nissan Xterra and it dies when the bake is applied. Also as the accelerator is pressed, the car hesitates before moving forward. When accelerating the car hardly moves and then will suddenly move ...

...Nissan pickup and it trys to turn over but wont and it has pushed a dirty oily something thru the air filter what cld been the problem it is possible that your timing belt has slipped and is now ...

...nissan d21 xe 4x4, 5speed manual trans wont shift in to forward gears, only reverse and 5th whether engine is runing5or not, will drive in reverse and can get to move in 5th but shift lever will not ...