Questions & Answers for: nikon sb 800 flash turn

Nikon Speedlight SB-800 My SB-800 will not sync with my D-70. The display shows MRPT ARPT BRPT CRPT all the time. The flash will fire when the shutter is released on the camera but it will not sync. ...

...Nikon never asked for my help. I don't reset my D200 this way. I use one of the Custom Setting Banks for remote flash, and simply select my normal Custom Setting when I want to return to normal TTL ...

sb-800, which is on camera. when i am shooting a series of images, the sb-600 will at random stop giving the 'fired properly' beep; it still fires, but no beep follows and all the images from there on

...Nikon SB-600 or SB-800 flash. When you set up the commander mode you can choose what channel to use. You would then set up your flash to run in the same mode on the same channel. How do I set up ...

...SB-800. Can this have anything to do with this problem? Today I looked at the image info of several images I took with & w/out the power pack. W/out the power pack the data appears normal & ...

...SB-800. Turns on and fires, but zoom sounds rough/fails Dropped my SB-800. Still turns on and fires, but when I mannually go through the full zoom range from 24mm to 105mm and back down, the zoom ...

...flash is faulty. It should be taken to an authorized repair centre for a repair estimate. Very few digital cameras have any user-serviceable parts. Please rate our solutions and if you still have ...

...nikon d200. New batteries. Turned on the camera then the flash. Set to TTL mode. Front Curtain Sync. No red eye reduction. The flash immediately began firing several bursts without my touching the ...

how do i turn off m zoom nikon sb 800 and switch back to ttl mode. Go to menu on camera, then flash/bracketing, then set TTL (through the lens) then set flash the same