Questions & Answers for: new cordless panasonic phone check

Panasonic KX-TG9341 (purchased 9/10/08) How to get my handset phone working again. Last night it was working, but today "check tel line" is shown on the handset display. I have followed the directions

...new message. But I cannot get the answering machine to work. Our non pansonic phones work fine so it is not the telephone line and I have checked all of the pansonic phones to make sure they are on ...

...phone company. The easiest way to check is to keep line busy and make call to the telephone number. If you get busy signal , you do not have call waiting. If it rings, you should hear short mute on ...

...new voice mail" What's that all about and how do I get rid of it? This is a cordless extention phone "its base station" must have a answering machine correct? Well you need to check you messeages on ...

...cordless phone Hi, To make two-party call on your Panasonic phone and ask the person on the other line to wait for a moment. Check to see if your Panasonic phone has a flash key feature. If it does, ...

new home. How do i reset it to find my phone line. Do i need to set it to factory settings and if so how do i do that. Thank you You should not have to do anything to make the base find the phone line

...new cord between the base and the jack and b) a different phone (I prefer an old cordless phone). If you still get a "line in use" message (alternate errors: fast busy signal or no dial tone), use ...

New cordless phone reads "check tele line" upon plugging it in to charge for the first time! Help Just purchased new cordless and have plugged in to charge and the display says "check telephone line" ...

...new phone data cord (RJ-11) between the base and the wall jack. (I've seen someone accidentally use a handset cord which doesn't work.) Test if there is a dial tone when this cord is plugged into the ...

...cordless telephone systems. Connecting the handset requires registering (pairing) it with the base and if the base can support another handset. First make sure that the base is plugged into an active ...