Questions & Answers for: new bell remote work receiver

...bell expressvu. How do I program the remote for the receiver to work. It was a remote for dishnetwork previosuly. Here is the link to pdf document: ...

Bell Express Vu 3100 Can anyone tell me if the 3100 receiver is compatable with the new samsung 19" lcd tvs. I bought one, at first I could not get it to work with the Bell remote, untill I did get ...

...new Bell ExpressVu remote control to my old Bell ExpressVu 3100 receiver and can't get it to work. The synch directions state that i need to press the "sys info" button on my receiver (which the 3100 ...

...new Dish HD/DVR Receiver and need the remote code for the Bose remote control to operate it. Here is what I did for my Bose Solo Tv to work on the Bell 9242 receiver.( see page 17 of Bell 9242 ...

...new remote on my bell receiver There could be a few different things causing the problem, but beginning troubleshooting would consist of the basic questions such as, are there fresh batteries in the ...

...new receiver and new changer. You didn't say if you have a Bell dish. We have and when went to HD , we now only have to use one changer. Before that with Bell, we needed two changers. Hope this

...bell housing is model 85464. I can no longer get the remote to work. I replaced the battery, I tried switching the dip switches (matching the receiver and remote), disconnected and reconnected power, ...

...Bell it's free if it's still on warranty, otherwise here is what you should try, open the battery panel there are screw there you must take off, then slowly using a butter knife go around the remote ...

My bell 9241 reciever quit recognizing its remote. The remote works with a different reciever so problem seems to be reciever and not remote. You may need a new sensor board in the receiver

...your receiver by pressing and holding the POWER button for 5 seconds. If that doesn't work, phone Bell and they will bring you a new one. https://www.google.com/search?q=bell+3100+not+powering+on