Question about 15208 Mechanical Sewing Machine
...thread a few inches to the back of the needle and hold when starting to sew the first 2-5 stitches. when you do not hold the thread the machine will pull the thread in the bobbin area and cause ...
...needle thread getting caught in the bobbin shuttle. I disassembled this area, found a random thread, and cleaned it out. I put it all back together but now the needle tread ALWAYS gets caught down ...
...needle anymore, thread gets caught on spool sometimes Upper thread breaks 1.the needle may be bent or damaged--try rolling the needle on a flat surface to see if it's bent or not Or the needle ...
...needle nosepliers to try & get the thread out, if that doesn't work then you might think about taking the machine to a sewing machine shop to have themachine checked since the needle ...
...the bobbin is turned the correct way in the bobbin case 4. make sure the thread has not come off the thread take up lever 5. Clean under the needle plate & in the bobbin area for lint or ...
Question about PE770 Computerized Sewing Machine
...needle make sure the top thread has not come off the thread take up lever try another bobbin make sure the bobbin is turned the right way in the bobbin case try rethread the machine top and bobbin ...
Question about Designer I
...thread the needle. You should feel some resistance. If there is none. Raise the presser foot and brush out any loose threads that might be caught in the upper tension disks. Many times, loose threads ...
Question about Designer I
...needle, changed thread,checked machine & bobbin thread are threaded correctly, made sure bobbin area was clean & dust free, checked tension & stitch length on upper thread. make sure the bobbin is ...
...Kept getting caught. Removed bobbin casing to see if any issues underneath. probably no issues with the bobbin or bobbin case but more with the needle thread tension not tight enough to make the ...
Question about Designer I
...needle and cleaned my machine also. If the thread keeps getting caught on the bobbin case and making a loud clanking noise, it's possible that the bobbin case is not properly installed or is damaged. ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions