Questions & Answers for: needle safety device activated brother

...needle to move, the machine just makes a horrible noise and activates the safety device every time. Has anyone else had this issue or know what causes it? You might have thread caught in the take-up ...

...safety device has been activated I NEED A unlock code clarion DXZ675USB A possible cause of this is that the upper thread has become tangled around the shuttle,and the needle is bent and hitting the ...

...safety device has been activated". The upper thread was tangled. I have fixed it... but now not able to move the needle position up. It still display the same error message Return the bobbin winding ...

...safety device has been activated Turn off the power supply and open the needle plate. Remove the bobbin and bobbin case. Clean the shuttle and surrounding area from any lint or thread that may have ...

needle started to ****-got "The safety device has been activated." error message. No tangled threads found. Balance wheel will move 1/4 turn either way. Both belts ok. Any ideas as to why it won't sew

...safety device continues to activate every time I sew. It sounds like something is grabbing the top needle, but it appears clear as well. it sounds like the machine needs to be serviced to see that ...

...safety device keeps activating on the machine, ive checked the threads and needles they seem ok. what else can I check please. remove the embroidery unit, change the needle and check again in the ...

needle down in the machine Safety device activated. I thought I had things fixed and it did start embroidering then the safety device kicked in. Now the needle is stuck in the machine. I can raise it.

...safety device activated when using the automatic needle threader How do I resolve this? a.Insert the bobbin case so that the mark on the bobbin case aligns with the mark on the machine. If you are ...

...needle hit a pin and safety device was activated. Now needle is hitting presser foot and there is a metal barrier also preventing needle from descending Brother SE400 hi Susan , sounds like you knock ...