Questions & Answers for: needle keeps hitting presser foot

...in place, fasten the foot to the presser bar with the screw. As the needle bar goes up and down, the lever on the even feed foot should rest on the needle bar needle serew and go up and down as

needle is hitting the forward part of the presser foot. Remove the foot - does the needle hit the needle plate? Is the needle bent? If the answer is no to both questions, it could be the machine needs

...needle keeps hittng my presser foot Fdthkj fhjh My first guess is that your needle is bent. Replace the needle and see if that helps! Make sure that your needle is inserted all of the way, plus the ...

...keeps breaking. Yesterday I realize it is hitting the pressure foot. I have changed out the needle (size 14) about 7 or 8 times now. I have adjusted the tension. I don't know what else to try to ...

...needle because when the presser foot is down it hits the plate on the bottom of the machine Refer to your manual, it gives all sorts of reasons for the needle to break, wrong bobbin size, scratched ...

...Hi if the needle is hitting the needle plate you best get in touch with who you bought it from, The needle position is a critical adjustment and is done in conjunction with other

hitting the needle plate? if so then you need to move the arm the adjustment is internal and you'll have to disassemble the clam shell case of the machine. May be best to have a pro fix it for you

...needle keeps hitting the bobbin case and break needle? and when i press foot control E1 comes on. www.brother-usa.com/support/ If you are experiencing an "E1" error message on the screen, means that ...

...needle hitting the presser foot? If so, it could be the wrong presser foot for your machine (especially if it is not attaching properly), could be the wrong needle for the machine or is installed ...

...hitting. When a needle hits something solid, it could knock the machine out of time, requiring a service call. Before running the machine, you can check whether the needle will clear by hand-rotating ...