Questions & Answers for: needle keeps coming unthreaded brother

NEEDLE KEEPS COMING UNTHREADED WILL NOT CATCH IN FABRIC I HAVE A LS-2125i THE NEEDLE KEEPS COMING UNTJREAD EVERY TIME I TRY TO SEW . I'VE RESET THE THE STITCH KNOB, I.VE MADE SURE THE THREAD IS NOT ...

NEEDLE KEEPS COMING UNTHREADED WILL NOT CATCH IN FABRIC I HAVE A LS-2125i THE NEEDLE KEEPS COMING UNTJREAD EVERY TIME I TRY TO SEW . I'VE RESET THE THE STITCH KNOB, I.VE MADE SURE THE THREAD IS NOT ...

...needle goes down and comes up unthreaded. i am familiar with sewing machines (not brother) can not figure this one out. Make sure the needle is installed correctly. With most sewing machines, this ...

...needle comes unthreaded I really like the automatic thread cutting feature. It saves lots of thread especially when quilting. But, then the needle comes unthreaded when sewing starts again. Even with ...

Needle come unthreaded sewing alone and needle comes unthreaded? try changing the needle--it's possible that something is wrong with the tip of the needle check on the needle plate for burrs--if you ...

...needle area come from and now will not self thread,? Ihave only had it 5 days. BrotherPe770 It will not self thread and looks like the attachment where you put the thread #7 is no longer attached ...

...in bobbin area and forms "birds nest" it tightens and will not proceed to embroider. Correct needles, stabilizer, thread and hooping method is correct. Completely unthread the top and bobbin ...

...keeps bunching under material and breaking-have changed needle, changed thread, retreaded an hundred times and rewound bobbin, adjusted tension Recheck threading on top according to manual. Sounds as ...

...keeps breaking could be it's old thread, need new needle or needle and thread not the right combo for material. Or yiur tension is too tight. not sure about the brush falling off. Up to you to try ...

...needle keeps working itself loose on my new brother pe770. Why? Hello Lisa Make sure that the needle is inserted all the way up, and the needle screw is nice and snugly tightened. Refer to page 36 of ...