Questions & Answers for: needle hook

Ad

Question about LS-1217 Mechanical Sewing Machine

1 Answer

is done with the needle bar and hook and needle clearance (the distance between the needle and hook) which should be about .030. I'm a Bernina tech but many machines work the same principle. Good luck

Ad

Question about LS-1217 Mechanical Sewing Machine

2 Answers

...needle the hook is too far left - or close to the needle. It's adjustable by loosening the set screw at the base of the hook and by gently tapping the hook away from the needle. You want the hook to ...

Ad

Question about LS-1217 Mechanical Sewing Machine

1 Answer

...hook passes the needle, it should pass the needle slightly above the eye of the needle. If the timing looks good, use some alcohol on a bit of cloth to clean the hook, careful around the tip of the ...

Question about Jem Gold 660 Sewing Machine

1 Answer

...hook passes the needle, it should pass the needle slightly above the eye of the needle. If the timing looks good, use some alcohol on a bit of cloth to clean the hook, careful around the tip of the ...

...needle and hook interplay. unthread needle for this. the hook should be about 1/16 from needle before the needle starts to rise.. good luck on setting the timing i can't even do that. since its a ...

Question about Jem Gold 660 Sewing Machine

1 Answer

...hook is close to the needle before retightening the clamping crews , and final give it a few turns by hand to make sure the hook locates the same all the time and the hook is not catching the needle, ...

...needle/ hook timing is out or needle in incorrectly the groove faces the cotton , the cut in faces the hook of the bobbin case the eye of the needle has to be just below the hook in the going up ...

...Needle and the hook is wrong, when the needle is about to lift, set the hook to be about 3 degrees off the needle line. This position may need tweaking but is usually about right. Thread the needle ...

Question about Jem Gold 660 Sewing Machine

1 Answer

hook - Replace needle. Threader hook bent - Replace with new needle threader hook. Hope this helps. Read more from the link I attatched. Good luck & have a nice day! Automatic needle threader will

...needle hook timing is consistent across the makes place the needle in the full down position the hook should be just about at the eye of the needle so that as the needle starts to come back up the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1134 Answers

Chris Wetmore

Level 2 Expert

187 Answers

Marvin
Marvin

Level 3 Expert

84625 Answers

Are you a Sewing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...