Questions & Answers for: needle changing tool

...to the left to release the needle. Insert new needle, with the flat side to the back of the machine. The manual shows a needle holder tool, but fingers work just as well as do a pair of

remove needle i have a huskylock 535D. how do i remove the needle to change it? do i need some kind of tool? Yes, a screwdrive that came in the tool kit.

...on the left, lower rightish one is for the right side needle. That loosens the neelde and it slides down. Put new needle in, slide it up, put the L tool back in the hole and tighten. show me the ...

tool do you use to change the needle on a husqvarna huskylock 910 Most sergers/overlockers will come with a tool kit including a small flat blade screw driver and a set of tweezers. Both are needed to

...changing the needles on my machine. I love the serger but when I try to change the needles it is difficult for me to hold two of them in one hand, make sure they are correctly inserted, then tighten ...

I lost the tool to change needles on my Elna Pro5 serger. What can I use instead? I need to change needles and have lost the tool glad you found something that worked.

...tool that came with the serger) to loosen the needle. Before loosing the screw, I would put a piece of fabric or paper over the needle plate to catch the needle (or part) to keep it from falling in ...

...the screw that holds it in, insert the proper tool and turn counter clock wise until the needle will slide down, remove and replace with new needle, then tighten, clockewise the screw. You are ...

...needle while changing it. The small magnets are usually available in auto supply stores. Here is a URL to show the magnet. http://www.sears.com/craftsman-magnetic-pick-up-tool/p-00941310000P If you ...

... Push the needle all the way up and, while holding it up, tighten the set screw. How To Change Sewing Machine Needle How To Change Your Sewing Machine Needle SINGER 1234 Sewing Machine Changing ...