Questions & Answers for: need set trip meter car

Ad

...set to "ODO"), and observe the mileage... (Note that some Toyota & Scion cars utilize the "Trip A" setting) Press in and HOLD the trip reset stick; do not release it. Turn the key on. Observe the ...

Ad

...need to do to clear that out or shut it off? have the oil changed and then ... with the ignition key on engine off, set trip meter to TRIP A , turn key off , now press and hold the trip button and ...

Ad

Question about 2007 Camry

1 Answer

...need to do to get it to turn off? have the oil changed and then ... with the ignition key on engine off, set trip meter to TRIP A , turn key off , now press and hold the trip button and turn the ...

Question about 1996 Maxima

1 Answer

...set the same mileage I have on the car now. mostly you need a new cluster so you need to find one with the same mileage or close to it look in the junk yard its cheaper and you can get lucky to find ...

Question about 1990 LTD Crown Victoria

2 Answers

need to check the speedo cable and the gear at the end of the cable housing. If the gear is cupped in the center it is worn out. Replace the gear by the color code at your local Ford dealer. The other

...need to reset the engine oil life setting located in the same place as your odometer/trip meters. Press the knob (in the upper right side of guage cluster) until "oil life" appears, then press and ...

Question about 2000 Camry

1 Answer

set the mileometer reading to miles not trip meter, turn off the ignition fully, press the button to reset the trip meter and keep it pressed down as you turn on the ignition key to key on engine off,

Question about 1998 DeVille

1 Answer

...but the info panel continues to say "need oil change". How do I erase/ re-set the message? try holding the trip meter button down and then turning the ignition on and holding it down for 30 ...

...set the odo/trip meter to read odopush and holsd the RESET switch turn the key off while holding the switchturn the key back on some lines will flash on the display when the odometer reading comes ...

...need a volt/ohm meter to check the injectors. The injector should ohm out between 11 and 15 ohms(leads on both ends of the injector). Set the meter to the lowest ohm reading. On the plug end you ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

84966 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

john h

Level 3 Expert

21061 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...