Questions & Answers for: need reprogram used ignition switch

how doo i reprogram my anty thft on my sunfire? Try this: Switch car on ( dont start) leave switched on for 30 mins.. then switch it off.. then.. Try to crank it.. Lemmie know

Ad

...a time by turning ignition switch off, back on, pressing switch, waiting minute or two, then repeating. Is this a switch problem, motor problem, or actuator problem? sounds like a motor problem to

Ad

Question about 2002 Grand Am

1 Answer

...reprogram the passlock, the security light stills stays on. The car has a remote start also, could this be the problem? You need to replace the passlock module. It is located behind the ignition ...

Question about 2002 Grand Am

1 Answer

...Ignition tumbler (Where you insert the key) Need to remove steering wheel, if tilt steering need remove c clip, then there is a hex bolt securing the tumbler. Ignition switch is a bit more involved. ...

...2002 Chevy Cavalier won't start. The service light comes on and the Theft system light flashes. Has a new battery this is a common problem with the passlock system im sure like everyone else you ...

Question about 2002 Montero Sport

1 Answer

...need to first install one of factory key into ignition.turn ignition switch on position for 5 seconds.switch off the ignition and remove key.wait 7 seconds insert new key into ignition switch.and ...

...ignition switch in a 2002 buick regal do the keys have to be reprogramed sometimes when I try to start the car all the dash lights flicker, it has died when using turn signals, it has died when ...

ignition tumbler and reprogramed the key anti theft lights go out. will start but wont shift out of park unless I pull the bcm fuse The shifter release solenoid is activated by the brake light switch.

...Reprogram the Ignition Key for an Oldsmobile Aurora www.ehow.com > Cars How to Reprogram the Ignition Key for an Oldsmobile Aurora. The Aurora is ...Replace the ignition switch in a 2002 Oldsmobile ...

...ignition switch on a 2002 cavalier i can turn the switch with or with out key but it will not start You really need to have the lock cylinder changed, but you will need to have the new lock cylinder ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...