Need to replace the transfer belt, cannot find the instructions on my user's guide. Do I need a repair tech or can I do it myself?? You need to place service call for the transfer belt. As for Sally's
Question about bizhub 350 All-In-One Laser Printer
...replace Transfer Belt, is there anyway to get back up running until new belt shows up Remove the transfer belt unit and change the chip fuse on transfer unit.The fuse is or a little green pieces or ...
...transfer belt on the right sid eof the machine. Belt must be removed to clean sensors. Once belt is removed sensors are located on a black plastic frame and have slideable covers that can be moved by ...
...transfer belt. Then right below the fusing unit right where the edge of the transfer belt is located when normal installed right below where the edge of the belt would be. Are two sensors they are ...
Question about bizhub 350 All-In-One Laser Printer
transfer belt if it is dirty with a soft cloth or change the transfer belt unit is damaged.Reinstall or reconnect IDC sensor shutter or connector for every color unit and clean the sensors when vacuum
...replace a toner cartridge by the look of it. You need a transfer belt to transfer the image to the paper and this is why they call it an image unit. I am guessing that the transfer belt needs ...
Question about bizhub C450P Laser Printer
...transfer belt from c450 bizhub konica minolta I have opened both sides from the deliverly side and the side of waste box , removed the waste box, unscrewed the screw but til failed to pull out the ...
i have trobul bizhub c450 code p21 Replace the transfer belt and roller and clean the sensor under neath the transfer belt
need to replace image transfer belt unit C360 error: "Replace Image Transfer Belt Unit" The error message under that title is "Have the image transfer belt replaced soon." It's a new unit, but resists
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions