Questions & Answers for: need replace brakes 2007 dodge

...need to be replaced in most cases. Check the wheel cylinder for leaks. Remove the dust boot from the side of the wheel cylinder and check for brake fluid leaks. If brake fluid is present the wheel ...

...need to replace them, but very pricy / Can I put smaller rims and tires on ; such as 15" rims? this is on a 2007 R/T Caliber not without a body kit. If it was designed for 18" i wouldn't use anything ...

...replace break lights in 2007 Dodge Caliber? Look inside the rear hatch area near the very rear of the vehicle. You should find a removable panel near the brake light housing. After you carefully ...

...need to probably replace a switch that attaches to the upper part of your brake.(It is a cheaply made part with plastic) I can't think of the name of it right now. It cost me about $17 at the dodge ...

...2007 Dodge Cliber R/T needed replacing since one light worked on high (not on low) and other worked on low (not on high). My tag and brake lights are also out. A mechanic was changing the headlight ...

...need to replace it how to do it. jack car up put it on jack stands,for safty remove tire,remove cotter pin ththen lock nut. see if it is 'press in' or bolt in.if it is press ingo to advance ...

...replace brake line by shop that does not know how to fix it.I paid alot of money for brake line as car would not pass inspection. Light was not on before job. They even charged another 50 when they ...

...i would look at the motor..either way you may have to take off the inside door panel.. You need to find out if you are getting power to the motor. Its pretty simple if you have the tools or ...

...need new bulbs , or a ground wire repaired. God bless your efforts. HELLO Ronald Russell, I don't know about the 4-way flasher issue... but I'd start with the elephant in the room (BRAKES). Diesel is ...