...nec VT676 model I use this projector as a projector for my SmartBoard and when i press the power on button, the power light goes green, then the status button goes green, then it blinks 6 times red 6 ...
NEC VT47 Projector stopped working and I now get a blink sequence at power up. I thought the bulb might have gone bad but it was not the bulb. Can you help me to troubleshoot this problem or direct me
...it and plugged it back in. That did not work. We replaced the lamp about 3 months ago and it probably has about 75 hours on it. indicating ballast unit problem nec projector do not work brand new ...
status lamp blinking orange 6 times PROJECTOR. NEC VT491 THE STATUS LIGHT IS BLINKING 6 TIMES RED, AND THE POWER LIGHT IS ORANGE
my lamp light stays on my status blinks if it's blinking red, how many times? 1 time- lamp cover. 2 times- overheating. 4- fans. 6- lamp. if the lamp led is lit red, replace the lamp.
www.retrevo.com/support/NEC-LT35-Projectors-manual/id/357ci857/t/2/ User manual above, use troubleshooting, procedure. neurowww.cwru.edu/_media/.../projector_manual_3062.pdf?id... service manual above
...NEC projector that keeps turning off. NEC LT260. I clenaed the filters, replaced the lamp, and now when I turn on the projector its on for about a minute then shuts itself of. The power button turns ...
...NEC VT470 Projector. The power light is steady orange and the status light blinks red 6 times. steady orange means projector in standby mode red light 6 times is a lamp error. either the lamp is old ...
...if it's a new projector, the lamp can go bad. since you stated that it's new, i would get in contact with NEC support, and let me know what going on. it should be still covered under
...nec vt540k and it stop projecting images. When i turn it the power led turned in solid green, the fan start working withouth problem but in few seconds the status led turned it in yellow blinking 1 ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions