Question about VT460 Multimedia Projector
NEC-VT460-Multimedia-Projector.aspx 2) Ensure that the lamp cover or lamp housing is installed correctly. See page E-30. 3) Check to see if the projector has overheated or the lamp has reached the end
NEC 1940 CX Monitor About every 30 seconds a message comes up right in the middle of the screen saying Resolution Notifier Optimal Resolution is 1280x1024 See User's Manual Press (Select) Since I ...
Question about Z215 10.4" LCD Panel with Video(16.7 Million) Z215 Multimedia Projector
NEC VT470 Multimedia projector This projector does not light up. The power indicator lights up and the Status light keep on blinking. Replaced old light with a new one. It does not light up. Any ...
Question about 30HF83 30" TV
nec tv.I have forgotten how to punch in the tv channels for the remote to work.I have lost the owners manual which would help me lots.Any help would be great.Allan I have forgotten how to punch in the
...NEC LT30, it trys to start op, but after 30 sec. it goes to standby mode and the status indicator is blinking red. According to the troubleshooting in the manual, the problem is: "Lamp Error" "Lamp ...
nec lt30 projector. all of a sudden it switched itself off. the status light flashes 6 times in sequence, telling me that the lamp has failed to light(it had been working for 30 mins) manual says wait
...NEC vt465 Look at page E-30, make sure the cover is screwed up tight as there is an "interlock". Most likely is the lamp hour meter needs reseting: Please update the question & let us know if the ...
NEC VT 660 Status light on The Status light comes on when I press on/ stand by and nothing happens...I can't get the projector to switch on....says I've pressed control panel key when control panel ...
...NEC, (Free), http://support.necam.com/mobilesolutions/hardware/Desktops/486/486man.ASP Left-click on - Service and Reference Manual (ELSIE) for V466 Series (DT & MT) (In blue) This is a PDF file. ...
Question about LT60LP Projector Lamp for LT240, LT220, LT26
...nec LT 260lp holding down the "OFF" key on the remote control for 30 seconds Have a nice day! We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel, motherboard, ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions