Questions & Answers for: nail depth

...nail depth. Note: While it is at first glance easy to use, after switching the settings a number of times it may become apparent that the coarse settings lack the refinement necessary for smooth and ...

senco sn-4 how to change nail depth when going from 2-in. to 3-in nails Take 2" long nails out and slide in 3" long nails.

...the depth adjustment wheel (C). There are twelve depth settings, 1 being the shallowest and 6 being the deepest. 2. To sink a nail deeper, rotate the depth adjustment wheel (C) to a higher

...nail gun that wont sink the nails all the way. How do I adjust depth of nails? The adjustment is inside the magazine there are 3 setting depending on the length of nail. Here is a PDF of the owners ...

...depth of the nail you have to increase or decrease the air pressure from the compressor. Look at the compressor and you will see a knob or dial that you can turn to increase or decrease the air ...

i have been installing a treated pine deck, but the nails are been driven in to far, i have tried adjusting the pressure from the compressor but have had no luck is there a depth adjustment on the gun

...depth the nail is driven to is on the same side of the gun you load the nail on, just at the bottom of the head and near where the head of the next nail to fire rests.  Pull down on and turn the ...

Bostich RN-46 seems to be over sinking the nails even went set to low depth No matter what setting you have on the depth the gun seems to over sink the nails. Adjust the air pressure on the regulator ...

bostitch rn45b wount drive the nails in all the way in and I don't see any adjustment like on my rn46 drives nails but they are sticking up about a 1/4 inch The bostitch nailer rn45 has an ...

...nail and reloading the coil. Depth Adjustment: The depth adjustment on your nailer may be set too deep, causing the driver blade to push down too far and shoot two nails instead of one. Try adjusting ...