Question about C340 Integrated Amplifier
NAD C340 has lost ability to switch between inputs I have a NAD C340 that can't switch between inputs. All inputs are active at all times. I took to high end shop to have it repaired. ALthough they ...
NAD C340 only the cd input operates properly. choose any other input and you only get one chanel of it. Hi There, In a sound system there is an input selector switch which just connects the input ...
...NAD C340 Some years ago I sent my NAD C340 away for repairs under guarantee. It kept cutting out and wouldn't switch between inputs. It wasn't repaired properly. When I got it back it had a horrible ...
Question about C340 Integrated Amplifier
NAD c340 integrated amplifier? The specs say 2x50W into 8 ohms. I could not located the 4 ohm specs, but it is logical to assume that you can run 2x100W into 4 ohms. The back panel seems to imply that
one channel is making a craCKING NOISE usually this indicates a blown output
NAD C340 - sound cuts out to left speaker. Cables and speakers are good. Nudging the cd input cable or whole unit can remedy and/or start the problem. I have looked for obvious signs of damage or ...
...nad c340 to power amp, cant get both speakers working It sounds like you're guessing. Have you looked at the manual? Register and download the manual for free at retrevo.com ...
...C340 that has similar problem, you must have bought this from ebay, lol. Nad made a mistake on the C range, the pre - power link can be shorted out. if the pre is shorted out it takes out the pre ...
where is the earth Outside your door in the garden.
nad c340 A short while after power up there is a cracking or popping sound on left channel. Right channel is fine. Music can be heard on both channels. Sometimes when switching on all input green leds
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions